HEXDUMP(1) User Commands HEXDUMP(1)
NAME
hexdump - display file contents in hexadecimal, decimal, octal, or ascii
hexdump options file ...
hd options file ...
DESCRIPTION
The hexdump utility is a filter which displays the specified files, or
standard input if no files are specified, in a user-specified format.
OPTIONS
Below, the length and offset arguments may be followed by the
multiplicative suffixes KiB (=1024), MiB (=1024*1024), and so on for
GiB, TiB, PiB, EiB, ZiB and YiB (the "iB" is optional, e.g., "K" has the
same meaning as "KiB"), or the suffixes KB (=1000), MB (=1000*1000), and
so on for GB, TB, PB, EB, ZB and YB.
-b, --one-byte-octal
One-byte octal display. Display the input offset in hexadecimal,
followed by sixteen space-separated, three-column, zero-filled bytes
of input data, in octal, per line.
-c, --one-byte-char
One-byte character display. Display the input offset in hexadecimal,
followed by sixteen space-separated, three-column, space-filled
characters of input data per line.
-C, --canonical
Canonical hex+ASCII display. Display the input offset in
hexadecimal, followed by sixteen space-separated, two-column,
hexadecimal bytes, followed by the same sixteen bytes in %_p format
enclosed in | characters. Invoking the program as hd implies this
option.
-d, --two-bytes-decimal
Two-byte decimal display. Display the input offset in hexadecimal,
followed by eight space-separated, five-column, zero-filled,
two-byte units of input data, in unsigned decimal, per line.
-e, --format format_string
Specify a format string to be used for displaying data.
-f, --format-file file
Specify a file that contains one or more newline-separated format
strings. Empty lines and lines whose first non-blank character is a
hash mark (#) are ignored.
-L, --color[=when]
Accept color units for the output. The optional argument when can be
auto, never or always. If the when argument is omitted, it defaults
to auto. The colors can be disabled; for the current built-in
default see the --help output. See also the Colors subsection and
the COLORS section below.
-n, --length length
Interpret only length bytes of input.
-o, --two-bytes-octal
Two-byte octal display. Display the input offset in hexadecimal,
followed by eight space-separated, six-column, zero-filled, two-byte
quantities of input data, in octal, per line.
-s, --skip offset
Skip offset bytes from the beginning of the input.
-v, --no-squeezing
The -v option causes hexdump to display all input data. Without the
-v option, any number of groups of output lines which would be
identical to the immediately preceding group of output lines (except
for the input offsets), are replaced with a line comprised of a
single asterisk.
-x, --two-bytes-hex
Two-byte hexadecimal display. Display the input offset in
hexadecimal, followed by eight space-separated, four-column,
zero-filled, two-byte quantities of input data, in hexadecimal, per
line.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
For each input file, hexdump sequentially copies the input to standard
output, transforming the data according to the format strings specified
by the -e and -f options, in the order that they were specified.
FORMATS
A format string contains any number of format units, separated by
whitespace. A format unit contains up to three items: an iteration
count, a byte count, and a format.
The iteration count is an optional positive integer, which defaults to
one. Each format is applied iteration count times.
The byte count is an optional positive integer. If specified it defines
the number of bytes to be interpreted by each iteration of the format.
If an iteration count and/or a byte count is specified, a single slash
must be placed after the iteration count and/or before the byte count to
disambiguate them. Any whitespace before or after the slash is ignored.
The format is required and must be surrounded by double quote (" ")
marks. It is interpreted as a fprintf-style format string (see
fprintf(3)), with the following exceptions:
1.
An asterisk (*) may not be used as a field width or precision.
2.
A byte count or field precision is required for each s conversion
character (unlike the fprintf(3) default which prints the entire
string if the precision is unspecified).
3.
The conversion characters h, l, n, p, and q are not supported.
4.
The single character escape sequences described in the C standard
are supported:
┌───────────────────┬────┐
│ │ │
│ NULL │ \0 │
├───────────────────┼────┤
│ │ │
│ <alert character> │ \a │
├───────────────────┼────┤
│ │ │
│ <backspace> │ \b │
├───────────────────┼────┤
│ │ │
│ <form-feed> │ \f │
├───────────────────┼────┤
│ │ │
│ <newline> │ \n │
├───────────────────┼────┤
│ │ │
│ <carriage return> │ \r │
├───────────────────┼────┤
│ │ │
│ <tab> │ \t │
├───────────────────┼────┤
│ │ │
│ <vertical tab> │ \v │
└───────────────────┴────┘
Conversion strings
The hexdump utility also supports the following additional
conversion strings.
_a[dox]
Display the input offset, cumulative across input files, of
the next byte to be displayed. The appended characters d, o,
and x specify the display base as decimal, octal or
hexadecimal respectively.
_A[dox]
Almost identical to the _a conversion string except that it
is only performed once, when all of the input data has been
processed.
_c
Output characters in the default character set. Non-printing
characters are displayed in three-character, zero-padded
octal, except for those representable by standard escape
notation (see above), which are displayed as two-character
strings.
_p
Output characters in the default character set. Non-printing
characters are displayed as a single '.'.
_u
Output US ASCII characters, with the exception that control
characters are displayed using the following, lower-case,
names. Characters greater than 0xff, hexadecimal, are
displayed as hexadecimal strings.
┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐
│ │ │ │ │ │ │
│ 000 nul │ 001 soh │ 002 stx │ 003 etx │ 004 eot │ 005 enq │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 006 ack │ 007 bel │ 008 bs │ 009 ht │ 00A lf │ 00B vt │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 00C ff │ 00D cr │ 00E so │ 00F si │ 010 dle │ 011 dc1 │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 012 dc2 │ 013 dc3 │ 014 dc4 │ 015 nak │ 016 syn │ 017 etb │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 018 can │ 019 em │ 01A sub │ 01B esc │ 01C fs │ 01D gs │
├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ │ │ │ │ │ │
│ 01E rs │ 01F us │ 0FF del │ │ │ │
└─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
Colors
When put at the end of a format specifier, hexdump
highlights the respective string with the color
specified. Conditions, if present, are evaluated prior
to highlighting.
_L[color_unit_1,color_unit_2,...,color_unit_n]
The full syntax of a color unit is as follows:
[!]COLOR[:VALUE][@OFFSET_START[-END]]
!
Negate the condition. Please note that it only makes
sense to negate a unit if both a value/string and an
offset are specified. In that case the respective
output string will be highlighted if and only if the
value/string does not match the one at the offset.
COLOR
One of the 8 basic shell colors.
VALUE
A value to be matched specified in hexadecimal, or
octal base, or as a string. Please note that the
usual C escape sequences are not interpreted by
hexdump inside the color_units.
OFFSET
An offset or an offset range at which to check for a
match. Please note that lone OFFSET_START uses the
same value as END offset.
Counters
The default and supported byte counts for the conversion
characters are as follows:
%_c, %_p, %_u, %c
One byte counts only.
%d, %i, %o, %u, %X, %x
Four byte default, one, two and four byte counts
supported.
%E, %e, %f, %G, %g
Eight byte default, four byte counts supported.
The amount of data interpreted by each format string is
the sum of the data required by each format unit, which
is the iteration count times the byte count, or the
iteration count times the number of bytes required by
the format if the byte count is not specified.
The input is manipulated in blocks, where a block is
defined as the largest amount of data specified by any
format string. Format strings interpreting less than an
input block’s worth of data, whose last format unit both
interprets some number of bytes and does not have a
specified iteration count, have the iteration count
incremented until the entire input block has been
processed or there is not enough data remaining in the
block to satisfy the format string.
If, either as a result of user specification or hexdump
modifying the iteration count as described above, an
iteration count is greater than one, no trailing
whitespace characters are output during the last
iteration.
It is an error to specify a byte count as well as
multiple conversion characters or strings unless all but
one of the conversion characters or strings is _a or _A.
If, as a result of the specification of the -n option or
end-of-file being reached, input data only partially
satisfies a format string, the input block is
zero-padded sufficiently to display all available data
(i.e., any format units overlapping the end of data will
display some number of the zero bytes).
Further output by such format strings is replaced by an
equivalent number of spaces. An equivalent number of
spaces is defined as the number of spaces output by an s
conversion character with the same field width and
precision as the original conversion character or
conversion string but with any '+', ' ', '#' conversion
flag characters removed, and referencing a NULL string.
If no format strings are specified, the default display
is very similar to the -x output format (the -x option
causes more space to be used between format units than
in the default output).
EXIT STATUS
hexdump exits 0 on success and > 0 if an error occurred.
CONFORMING TO
The hexdump utility is expected to be IEEE Std 1003.2
("POSIX.2") compatible.
EXAMPLES
Display the input in perusal format:
"%06.6_ao " 12/1 "%3_u "
"\t" "%_p "
"\n"
Implement the -x option:
"%07.7_Ax\n"
"%07.7_ax " 8/2 "%04x " "\n"
MBR Boot Signature example: Highlight the addresses cyan
and the bytes at offsets 510 and 511 green if their
value is 0xAA55, red otherwise.
"%07.7_Ax_L[cyan]\n"
"%07.7_ax_L[cyan] " 8/2 " %04x_L[green:0xAA55@510-511,!red:0xAA55@510-511] " "\n"
COLORS
The output colorization is implemented by
terminal-colors.d(5) functionality. Implicit coloring
can be disabled by an empty file
/etc/terminal-colors.d/hexdump.disable
for the hexdump command or for all tools by
/etc/terminal-colors.d/disable
The user-specific $XDG_CONFIG_HOME/terminal-colors.d or
$HOME/.config/terminal-colors.d overrides the global
setting.
Note that the output colorization may be enabled by
default, and in this case terminal-colors.d directories
do not have to exist yet.
REPORTING BUGS
For bug reports, use the issue tracker at
https://github.com/util-linux/util-linux/issues.
AVAILABILITY
The hexdump command is part of the util-linux package
which can be downloaded from Linux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
util-linux 2.39.1 2023‐06‐27 HEXDUMP(1)