Connectivity Tests and Cleanup

and `alpine-net`. It should be able to reach all of the other containers. However, you will need to address `alpine3` by its IP address. Attach to it and run the tests. ```console $ docker container attach alpine4 # ping -c 2 alpine1 PING alpine1 (172.18.0.2): 56 data bytes 64 bytes from 172.18.0.2: seq=0 ttl=64 time=0.074 ms 64 bytes from 172.18.0.2: seq=1 ttl=64 time=0.082 ms --- alpine1 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.074/0.078/0.082 ms # ping -c 2 alpine2 PING alpine2 (172.18.0.3): 56 data bytes 64 bytes from 172.18.0.3: seq=0 ttl=64 time=0.075 ms 64 bytes from 172.18.0.3: seq=1 ttl=64 time=0.080 ms --- alpine2 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.075/0.077/0.080 ms # ping -c 2 alpine3 ping: bad address 'alpine3' # ping -c 2 172.17.0.2 PING 172.17.0.2 (172.17.0.2): 56 data bytes 64 bytes from 172.17.0.2: seq=0 ttl=64 time=0.089 ms 64 bytes from 172.17.0.2: seq=1 ttl=64 time=0.075 ms --- 172.17.0.2 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.075/0.082/0.089 ms # ping -c 2 alpine4 PING alpine4 (172.18.0.4): 56 data bytes 64 bytes from 172.18.0.4: seq=0 ttl=64 time=0.033 ms 64 bytes from 172.18.0.4: seq=1 ttl=64 time=0.064 ms --- alpine4 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.033/0.048/0.064 ms ``` 8. As a final test, make sure your containers can all connect to the internet by pinging `google.com`. You are already attached to `alpine4` so start by trying from there. Next, detach from `alpine4` and connect to `alpine3` (which is only attached to the `bridge` network) and try again. Finally, connect to `alpine1` (which is only connected to the `alpine-net` network) and try again. ```console # ping -c 2 google.com PING google.com (172.217.3.174): 56 data bytes 64 bytes from 172.217.3.174: seq=0 ttl=41 time=9.778 ms 64 bytes from 172.217.3.174: seq=1 ttl=41 time=9.634 ms --- google.com ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 9.634/9.706/9.778 ms CTRL+p CTRL+q $ docker container attach alpine3 # ping -c 2 google.com PING google.com (172.217.3.174): 56 data bytes 64 bytes from 172.217.3.174: seq=0 ttl=41 time=9.706 ms 64 bytes from 172.217.3.174: seq=1 ttl=41 time=9.851 ms --- google.com ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 9.706/9.778/9.851 ms CTRL+p CTRL+q $ docker container attach alpine1 # ping -c 2 google.com PING google.com (172.217.3.174): 56 data bytes 64 bytes from 172.217.3.174: seq=0 ttl=41 time=9.606 ms 64 bytes from 172.217.3.174: seq=1 ttl=41 time=9.603 ms --- google.com ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 9.603/9.604/9.606 ms CTRL+p CTRL+q ``` 9. Stop and remove all containers and the `alpine-net` network. ```console $ docker container stop alpine1 alpine2 alpine3 alpine4 $ docker container rm alpine1 alpine2 alpine3 alpine4 $ docker network rm alpine-net ``` ## Other networking tutorials - [Host networking tutorial](/manuals/engine/network/tutorials/host.md) - [Overlay networking tutorial](/manuals/engine/network/tutorials/overlay.md) - [Macvlan networking tutorial](/manuals/engine/network/tutorials/macvlan.md)

This section continues the connectivity testing, demonstrating that 'alpine4' can reach all other containers, including itself. It then tests internet connectivity by pinging google.com from 'alpine4', 'alpine3', and 'alpine1', showing that all containers can access the internet. Finally, the section details how to stop and remove all containers ('alpine1', 'alpine2', 'alpine3', 'alpine4') and remove the 'alpine-net' network to clean up the environment.